KTI Networks Fast Ethernet switches Guia de Instalação

-1-DOC.050710KSD-800SeriesIndustrial 8-Port Fast Ethernet Switcheswith Fiber ConnectivityInstallation Guide

-10-1.8 SpecificationsNetwork PortsSwitched Port Number Model 800 800-1 series 800-2 seriesPort 1 10/100TX 10/100TX 10/100TXPort 2 10/100TX 10/100TX

-11-Switch FunctionsMAC Addresses Table 1K entriesForwarding & filtering Non-blocking, full wire speed10Mbps - 14,880 pps at 64-byte packets100Mbp

-12-1.9 Model DefinitionsModel FX Port Connector Cable Distance max. Operating Temperature800 no800-1T FX8 ST MMF 2km -10oC ~ 70oC800-1C FX8 SC MMF 2

-13-A variety of fiber options and the optical specifications is provided as follows:Model FX Port & Cable Wavelength Tx Power Rx sensitivity Rx m

-14-2. Installation2.1 UnpackingThe product package contains:• The switch unit• One DIN-rail mounting kit• One product CD-ROM2.2 Safety CautionsTo

-15-2.3 DIN-Rail MountingIn the product package, a DIN-rail bracket is provided for mounting the switch in a industrial DIN-railenclosure.The steps t

-16-2.4 Panel MountingThe switches are provided with an optional panel mounting bracket. The bracket support mounting theswitch on a plane surface se

-17-3. Screw the switch unit on a panel. Three screw locations are shown below:

-18-2.5 Applying PowerThe power specifications of the switch are:Operating Voltage +7 ~ +30VDCPower Consumption Max. 7.3W @30VDCThe switch provides t

-19-Using DC Power JackWhen an external power system is not available, the switch provides a DC jack to receive power fromtypical AC-DC power adapter

-2-(C) 2002 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced inany form or by any means or used to make any dire

-20-2.7 Reset ButtonThe reset button is used to perform a hardware reset to the switch. It is not used in normal cases andcan be used for diagnostic

-21-2.9 Making UTP ConnectionsThe 10/100TX ports supports the following connection types and distances:Network Cables10BASE-T: 2-pair UTP Cat. 3,4,5

-22-2.10 Making Fiber ConnectionsFX7 port and FX8 port operate on 100Mbps and full duplex.The following figure illustrates a connection example betwe

-23-2.11 LED IndicationLED Function State InterpretationPWR Power status ON The power is supplied to the switch.OFF The power is not supplied to the

-3-The information contained in this document is subject to change without prior notice. Copyright (C). AllRights Reserved.TRADEMARKSEthernet is a reg

-4-Table of Contents1. Introduction... 51.1 Features

-5-1. IntroductionThe KSD-800 series is 8-port full wire speed Fast Ethernet switches for industrial applications. De-pending on the fiber connectivi

-6-1.1 Features• Fast Ethernet switch with 8 10/100TX copper ports• Auto MDI/MDI-X detection on all 10/100TX ports• Auto-negotiation capable on all 1

-7-1.3 Front PanelThe figure below shows the individual front panel of three model series. The main difference is thenumber of the equipped fiber por

-8-Model 800-1 series provide eight 10/100TX copper ports and one 100FX fiber connector on Port 8.Model 800-2 series provide eight 10/100TX copper por

-9-1.6 Top PanelAll three model series provide same top panel as figure shown below:The main functions are:DC Power Jack This connector is used when