KTI Networks KS-801 Manual do Utilizador

-1-Installation Guide10/100 Fast Ethernet ManagedSwitch with Fiber ConnectivityKS-801DOC.001002-KS801-K

-10-2. Installing the SwitchThe switch is designed to operate in workgroup environments without acomplicated configuration procedure. It also features

-11-2.2 PanelsThe following figure illustrates the major components on front and rearpanels:10/100 Port 1-9 10BASE-T/100BASE-TX Port #1 - #9Crossover

-12-2.3 Mounting the SwitchesThe switches can be placed on a desktop as a stand-alone unit. Allowenough ventilation space between the switch and

-13-3. Making Network Connections3.1 Network Switched PortsThe following figure illustrates the switched ports provided on the switch.The switch comes

-14- 10/100BASE-TX Fast Ethernet Switched PortsEach switched port supports one connection to a LAN segments. Eachsegment is an independent shared net

-15-3.2 10/100BASE-TX Fast Ethernet PortsThe switch can support connections to the following devices:• 10BASE-T or 10/100BASE-TX network cards• 10BASE

-16-Flow ControlHalf-duplex mode uses back pressure flow control to prevent the receiv-ing buffer from being overrun by data from a source node. Full-

-17-3.3 Fast Ethernet Fiber SlotThe switch provides one fast Ethernet fiber slot. It can accommodate oneoptional fiber module for your fiber connectio

-18-Module OutlineThe following figure illustrates an example of the fiber modules. Differenttype of modules is mounted with different fiber connector

-19-Duplex Mode SettingThe duplex mode used for the fiber module is configured by softwareport control settings. See chapter 5 for more information.Sp

-2-Ó 2000 KTI Networks Inc. All rights reserved. No part of this documen-tation may be reproduced in any form or by any means or used to makeany dire

-20-3.4 Making Trunk ConnectionsTwo switch units can be cascaded together through any regular switcheddata port on each unit when a port expansion is

-21-The following figure illustrates an example of 2-port trunk connectionbetween switch A and switch B. The aggregated bandwidth of the trunkis 400Mb

-22-The following figure illustrates a typical example of trunk connectionsbetween three switch units. Each trunk is a 2-port trunk.There are two trun

-23-4. LED Indicators4.1 LED PanelsThe switch provides comprehensive LED indicators for diagnosing andmonitoring the operation of the unit as illustra

-24-5. Performing Network Management5.1 Management SupportThe switch is featured with management functions and can be managedby using the following me

-25-5.2 Management objectsThe following table lists the management objects supported by the system:LoginPort Status - Port link status - Port control

-26-5.3 Setting IP AddressBefore performing any management operation over network, the mostimportant thing is to learn the detailed information about

-27-Use the supplied RS232 cable to make the console connection directlyfrom a PC COM port. The pin assignments of the connection are:Switch DTE conso

-28-5.7 SNMP ManagementSNMP management are performed at a network management station run-ning SNMP network management application manager software wit

-29-switch. TFTP is an embedded function supported in the DOS window ofany Windows NT system.Console SFTP Utility1. Connect your PC to the switch con

-3-9-Port Fast Ethernet ManagedSwitch with Fiber ConnectivityDOC.001002-KS801-NKP/N: 750-0150-002INSTALLATION GUIDE

-4-The information contained in this document is subject to change without prior notice.TRADEMARKSEthernet is a registered trademark of Xerox Corp.Thi

-5-Table of Contents1. Introduction... 61.1 Features...

-6-1. IntroductionDriven by recent advances in desktop computing technology, todaysnetwork applications have increased in speed, power and the abilit

-7-1.1 FeaturesDesigned for resolving congestion problems caused by bandwidth-hun-gry devices and bandwidth-intensive applications as well as a high n

-8-Management Features: Telnet for remote control Provides one RS232 local console port IEEE 802.1d Spanning Tree protocol TFTP - software upgrade

-9-1.2 SpecificationsStandard IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX FXIEEE 802.3x Full duplex flow controlIEEE 802.1D Spanning treeNetwork ports